About Us

Products

Customer Success

Support & Training

Cad on Demand

CEO BLOG

Solidscape 
Rhino3D
Scan System
Imes Icore
 
 
Intriguity > Products > Solidscape > Specification
Models

SOLIDSCAPE SYSTEM SPECIFICATIONS


Easy to Use


- Self installation (plug & play) & automatic job setup.
- Single touch start with self calibration
- Icon based user interface
– easier to operate - Remote assistance possible

High Precision Results

- Z Axis Build Layer : Adjustable from 0.06mm to 0.025mm for 3Z Studio & from 0.06mm to 0.076mm for 3Z Pro
- Achievable accuracy : ± 0.0010 inch/inch (±25.4µ/25.4mm) along each axis X, Y and Z - Surface Finish : 32-63 micro-inches (RMS)
- Minimum Feature Size : 0.254mm
- XY Resolution : 5000 x 5000 dpi & Z Resolution : 8000 dpi

Office Friendly installation

- Small footprint ( 21.4 x 18 x 16 inches )
- Weight : 34 kgs - Power requirements : 230V 50Hz AC with a dedicated 10 ampere circuit.
- Recommended ambient operating temperature  : (16oC to 27oC) at a 40% to 60% range of humidity.
- CE certified; FCC Class A approved; TUV approved (EN 6-950 Complaint); RoHS Complaint.

High Efficiency

- User adjustable speed and build parameters for job-by-job efficiency.
- Unattended operation for the entire duration of the job.
- Automatic status monitoring and fault detection ( local and remote ).
- Automatic re-start of build from point of interruption.
- Easy to dissolve wax support: no post-build benchwork of model surfaces.
- Fast meltout in autoclave, no ash, residue or thermal expansion.
- Outstanding casting yields.

 

© Intriguity